Bodyguard
Presence Sensor: Provides an active infrared
presence sensor that utilizes
a combination of focused and diffused infrared
technology as follows.
a. Bodyguard
sensor shall detect stationary humans or
equivalent
within the sensing pattern.
b. Sensor
shall have a
sensing pattern that is fully adjustable
by
remote control, for sensitivity, pattern
width and pattern depth.
Pattern size adjustments
made by masking a lens shall not be
acceptable.
c. When
used with BEA’s lockout relay, the
Bodyguard shall provide
2 independently
adjustable patterns: One for the door closed
position, and one for the door open position.
For the door open
position, the sensor
shall enable an area of detection that
reaches through the threshold by approximately
12 inches (305
mm) toward the non-swing
side of the door.
d. Sensor
Dimensions: 11.8 inches (300 mm) wide by
1.9 inches
(48 mm) high by 1.9 inches (48
mm) deep.
e. Mounting
Height: 7 feet (2.13 m) to 9 feet (2.74
m) above
finished floor.
f. Finish:
Black anodized aluminum extrusion / black
ABS end-caps
/ infrared lens
|
