Commander 2006 System: System utilizes microwave technology and infrared technology as follows.
a. Eagle planar K-Band microwave motion detector with
adjustable vertical (0 to 90 degrees) and horizontal (30
degrees L/R angle), and detection capability down to 2.2
inches (56 mm) per second.
b. Bodyguard header-mounted active infrared presence
sensor that has a dual pattern ability (open position and
closed position) and is capable to detect stationary humans
on the swing side of the door and in the threshold area, for
a minimum of 30 seconds.
c. Self Contained Infrared Beam Set: BEA SBK-30 for
sliding and swinging door applications. A self contained
infrared beam set provides an utilizing active infrared
technology presence sensor.
1. Transmitter/Receiver Sensor Dimensions: .62
inch (15.70 mm) diameter by 1.25 inches
(31.80 mm) deep.
2. Finish: Black ABS / infrared lens.
3. Mounting Accessories Included:
a. Jamb Cap Kit: Provide for use
on sliding door applications.
b. Rail Mount Kit: Provide for use
at barstock type guide rail
mounts on swinging door
applications.
c. Beam Interface Kit: Provide
where required to convert an
NPN output to a dry relay
output with adjustable hold
time. Suitable for use with up to
four pairs of SBK-30 beam
inputs.
d. All sensors and beams within the system shall wire into a
central micro-processed hub that provides data for proper
safety system operation. Lockout Device: LO Linx
integrates all door sensors and provides intelligent
synchronization, positioning and operation. Includes quick
disconnects for sensors with push button setting adjustments
and LCD display. Housing, polycarbonate, red translucent
5.2 inches (133 mm) wide by 2.2 inches (55 mm) deep by
1 inch (25 mm) high.
