Wizard System: System comprised of 2 Wizard Sensors. System utilizes dual technology: K-band (24.125GHz) Microwave Motion and Focused Active Infrared technology as follows.

a.  The microwave portion of the sensor shall be utilized for

     motion detection for the purpose of door activation, and the

     infrared portion (comprised of 2 curtains with a total of 48

     infrared spots) shall be used for the purpose of presence

     detection near the door threshold area – the two patterns shall

     overlap each other.

b.  Infrared curtains shall have angle adjustment capability, and

     shall be capable to reach within 2 inches (51 mm) of the face

     of the sliding door. The infrared curtains shall not shut off at

     any door position.

c.  Infrared curtains shall have a self-adaptation time of 30

     seconds to infinity, enabling the sensor to learn permanently

     changed environments.

d.  Infrared sensor shall provide a 6 feet 6 inches (1.98 m) wide

     (wide lens) infrared pattern when mounted at 7 feet (2.13 m),

     and a 3 feet 3 inches (1 m) wide pattern when using the

     narrow lens.

e.  Microwave portion of the sensor shall have bi-directional and

     uni-directional sensing capability, and shall have a fully

    adjustable antenna angle. The sensor shall provide a maximum

    field of motion detection 13 feet (4 m) wide by up to 10 feet

    (3.05 m) deep.

f.  Sensor shall be fully adjustable by remote control.

g. Sensor Dimensions: 14-1/4 inches (108 mm) (362 mm) wide by

    1-1/2 inches (38 mm) high by 1-3/8 inches (29 mm) deep.

h. Mounting Height: 7 feet (2.13 m) to 12 feet (3.66 m) above

    finished floor.

i.  Finish: Black ABS housing. May be painted non-metallic only.

j.  For 1-Way traffic applications, the sensor that is mounted at

    the side “not intended for use” shall shut off when the door or

    doors are within 6 inches (152 mm) of the fully closed position.