• All-active plate activates with any "push" location
  

• Perfect for all applications.
  

• Screws come in multiple sizes (#6 & #8), which fit both single and double gang mounting boxes.

• Weather boot between plate and back plate for all weather applications.

• Also available in protective blue leatherette finish.
  

Push plate shall utilize a single pole dry contact switch capable to provide a normally open or normally closed contact.

a.  Push plate provided with no exposed fasteners on the faceplate

     area.

b.  Faceplate utilizes an abrasive etch lettering and/or logo. Push

     plates made of plastic, or having 

     surface applied painted or decaled lettering shall not be

     acceptable.

c.  Stainless steel square style push plate (PBS) for bollard and wall

     mount applications.

1.  Beveled edges provide a tamper and vandal

     proof solution

2.  All-activate plate activates with any "push"

     location.

3.  Weather boot provided between plate and plate

     back.

** NOTE TO SPECIFIER **  Select one of the following model paragraphs and delete those not required.

4.  Model 10PBS marked PUSH TO OPEN, 4.75 inches

     (120.65 mm) by 4.75 inches (120 mm) by 1.27

     inch (32.25 mm).

5.  Model 10PBSLL Handicapped logo 4.75 inches

     (120.65 mm) by 4.75 inches (120 mm) by 1.27

     inch (32.25 mm).

6.  Model 10PBS1 Handicapped logo and marked

     PUSH TO OPEN, 4.75 inches (120.65 mm) by

     4.75 inches (120 mm) by 1.27 inch (32.25 mm).

6.  Model 10PBS10 no marking, 4.75 inches (12

     mm) by 4.75 inches (120.65 mm) by 1.27 inch

     (32.25 mm).

** NOTE TO SPECIFIER **  Select one of the following mounting paragraphs and delete the one not required.

7.  Surface Mount.

8.  Flush Mount.