• Plate arrives fully-assembled with an RF433 transmitter, significantly reducing installation time
  

• Tamper-resistant recessed plate with beveled edges can be directly installed to any flat surface such as a wall or mounting post

• Weather boot between plate and back plate for all weather applications.
  

• All-active plate made of durable stainless steel

Panther push plate utilizing radio controlled (RF) transmitters, shall use a plastic conduit box. Metal conduit boxes for RF devices shall not be acceptable.

a. Wireless design, 433Mhz digital frequency with rolling code encrypted for
security.
b.  Push plates provided with no exposed fasteners on the faceplate area.
c. Faceplate utilizes an abrasive etch lettering and/or logo. Push plates made
of plastic, or having surface applied painted or decaled lettering shall not
be acceptable.
d. Stainless steel square style push plate (EMR475 Series) for wall mount
applications.

1. Beveled edges provide a tamper and vandal proof solution.
2. All-activate plate activates with any "push" location.
3. Weather boot provided between plate and plate back for a NEMA 4
enclosure.

** NOTE TO SPECIFIER ** Select one of the following model paragraphs and delete those not required.

e. Model 10EMR475 marked PUSH TO OPEN 5.12 inches (130mm) by 1.42 inches (36.1 mm).
f. Model 10EMR475L Handicapped logo 5.12 inches (130mm) by 1.42 inches (36.1 mm).
g. Model 10EMR4751  Handicapped logo and marked PUSH TO OPEN 5.12 inches (130mm) by 1.42 inches (36.1 mm).
h. Model 10EMR47510 no marking 5.12 inches (130mm) by 1.42 inches (36.1 mm).

** NOTE TO SPECIFIER ** Select one of the following finish paragraphs and delete the ones not required.

1. Brushed stainless finish.
2. Blue colorcoat finish with clearcoat.