• Narrower push plate makes an easy application on guide rails and swing doors.
  

• Stainless steel finish will not deteriorate or rust where it is touched and is scratch and scuff resistant.

• Weather boot between plate and back plate for all weather applications.

• Both cherry switch and microswitch versions are available.

Push Plates, Wired: Push plates shall utilize a single pole dry contact switch capable to provide a normally open or normally closed contact.

a.  Push plates provided with no exposed fasteners on the faceplate

     area.

b.  Faceplate utilizes an abrasive etch lettering and/or logo. Push

     plates made of plastic, or having surface applied painted or

     decaled lettering shall not be acceptable.

c.  Stainless steel rectangular jamb style push plate (PBJ) for

     mounting on guide rails and swing doors.

1) Beveled edges provide a tamper and vandal proof

    solution.

2) All-activate plate activates with any "push"

    location.

3) Weather boot provided between plate and plate

    back.

** NOTE TO SPECIFIER **  Select one of the following model paragraphs and delete those not required.

4) Model 10PBJML Handicapped logo, 4.75 inches

    (120 mm) by 1.50 inches (38.10 mm) by 1.31

    inch (33.27 mm).

5) Model 10PBJM1 Handicapped logo and marked

    PUSH TO OPEN, 4.75 inches (120 mm) by 1.50

    inches (38.10 mm) by 1.31 inch (33.27 mm).

** NOTE TO SPECIFIER **  Select one of the following mounting paragraphs and delete the one not required.

6) Surface Mount.

7) Flush Mount.