foofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofooairporthospitalsindustrylogisticsretailArtboardempowermentinnovationbrochureproductpassionproductsrespectteamworkwhitepaperwiring-diagramsfacebookinstagramlinkedintwitteryoutubearrowarrow-redux-bigarrow-redux-toparrow-redux-toparrow-reduxarrowcountrydownloadeyefile2filtergridhamburgerlanguagelistnopdfphoneplusresetsearchsubscribevideoyes

Beambox

ACTIVE INFRARED MOTION & PRESENCE SENSOR
beambox

Description

BEA’s Beambox is a universal sensor ideal for a variety of unique off-door applications. The Beambox provides motion and presence detection, utilizing 15 active infrared spots that can be programmed into nine uniquely shaped detection zones.

BEA’s Beambox is ideal when very specific detection patterns are required, but not readily available in off the shelf sensors. These patterns are often necessary in trains, buses, turn stiles, back office retail and other unique areas. The Beambox provides a DRY contact relay that can be used to switch any peripheral device, such as a buzzer, light or video camera.

Features

Off door presence detection

Three rows of five infrared spots ideal for unique off door applications

Multple preset detection zones

Typical detection area of 39 x 39 inches when mounted at a height of 84 inches

Low profile design

Recessed mounting for low profile applications

Customizable to your application

Four infrared immunity modes and nine unique preset patterns are available

Table of specifications

Technology

Active infrared with background analysis

 

Detection Mode

Motion & Presence

 

Optical Features

15 independent IR spots with a diameter of typ. 0.43 in

 

Maximum Mounting Height

98.4 in (8.2 ft) flush mounting

 

Tilt Angles

0° to 20° vertical in steps of 5°

 

Detection Zone (WxD; @ H)

39.6 in (3.3 ft) x 46.8 in (3.9 ft); @ mounting height 6.5 ft; tilt angle 20°

 

Reaction Time

< 100 ms

 

Supply Voltage

12 - 30 VAC +/-10%
12 - 45 VDC +/-10%

 

Power Consumption

< 3 W (VA)

 

Output
Maximum Contact Voltage
Maximum Contact Current
Maximum Switching Power

Relay (free of potential change-over contact)
42 VAC - 60 VDC
1 A (resistive)
30 W (DC) / 60 VA (AC)

 

Monitoring Input
Input Voltage
Input Current

Optocoupled (free of potential)
10 - 24 VDC
< 10 mA (@24 V)

 

Connection (sensor side)

Unplugged integrated 7-pin connector

 

Hold Time

0.5 s to 9 s (adjustable)

 

LED Signal

Red and Green

 

Mains Frequency

50 - 60 Hz

 

Temperature Range

-13°F to +136°F (operating);
-22°F to +140°F (storage)

 

Degree of Protection

IP41

 

Dimensions (WxHxD)

5.5 in x 1.5 in x 2.2 in

 

Weight

3.5 oz

 

Enclosure Material / Color

Polycarbonate / Black

 

Cable Length

96 in (8 ft)

 
Versions
  • beambox
    10BEAMBOX

    Active infrared motion and presence sensor

Accessories
Downloads
See all our products