Eagle Family

Motion sensor for automatic doors


BEA’s Eagle Family of motion sensors is designed for the activation of automatic pedestrian doors.

The Eagle is universally compatible with all makes and models of swinging, sliding and revolving automatic doors. The Eagle HM has a mounting height of 13 to 16.5 feet, making it ideal for use on large-format doors in industrial environments.

Unidirectional radar increases energy efficiency by detecting approaching traffic while ignoring motion away from the door.


Save on energy costs

Energy savings due to unidirectional detection capability

Eliminate false detections

Immunity settings can be adjusted to reduce unwanted detections caused by rain, snow and header vibrations

Accurate and precise

Motion detection feature capable of detecting traffic moving as slow as 2 in. / sec.

Aesthetically pleasing design

Compact, low profile design

Table of specifications


Microwave Doppler Radar


Detection Mode



Transmitter Frequency

24.150 GHz


Transmitter Radiated Power

< 20 dBm EIRP


Transmitter Power Density

< 5 mW/cm2


Minimum Detection Speed

2 in / s (measuring based on optimal conditions)


Mounting Height
Eagle HM

72 in – 156 in (6 ft – 13 ft)
156 in – 198 in (13 ft – 16.5 ft)


Supply Voltage

12 – 24 VAC ±10%
12 – 24 VDC 30% / -10%


Mains Frequency

50 – 60 Hz


Maximum Power Consumption

< 2 W


Maximum Contact Voltage
Maximum Contact Current
Maximum Switching Power

Relay (free of potential change-over contact)
42 VAC / VDC
1 A (resistive)
30 W (DC) / 60 VA (AC)


Cable Length
Eagle HM

96 in (8 ft)
96 in (8 ft)


Degree of Protection



Tilt Angles

0° – 90° vertical; −30° to 30° lateral


Norm Conformance

R&TTE 1999 / 5 / EC; EMC 2004 / 108 / EC;

LVD 2006 / 95 / EC RoHS 2 2011 / 65 / EU

  • eagle

    Microwave motion sensor

  • eagle

    High-mount microwave motion sensor for industrial doors

  • eagle-spacer
    Eagle Spacer Bracket

    Spacer bracket for the Eagle

  • Eagle Ceiling Adapter

    Recessed ceiling enclosure for BEA’s Eagle microwave motion sensor.

  • eagle-mounting-bracket
    Eagle Mounting Bracket

    Angled mounting bracket for the Eagle.

  • eagle-rain-accessory
    Eagle Rain Accessory

    Standard plastic rain accessory that covers the top of the sensor.

  • eagle-rain-cover-with-eagle
    Eagle Rain Cover

    Large plastic rain accessory that covers the entire body of the sensor.

  • industrial-bracket
    Industrial Bracket

    Universal industrial mounting bracket

  • mini-industrial-bracket
    Mini Industrial Bracket

    Universal industrial mounting bracket

  • bea-remote
    BEA Universal Remote Control

    BEA Universal Remote Control

  • 24vac-transformer

    BEA offers a variety of transformers to meet the needs of most applications.

  • eagle-q-disconnect
    Eagle Q-Disconnect

    48″ Quick Disconnect Harness for Eagle

Frequently asked questions

I replaced an EAGLE on a STANLEY door, why is it working abnormally?

STANLEY uses a custom EAGLE called the SU100.  When installing a standard EAGLE, set the relay output to “2”.


Why is the two-way traffic, swing door with EAGLES on both sides recycling?

The EAGLE is mounted above the door and, therefore, detecting the moving door.  Relocate the EAGLE beyond the swing path of the doors.


Can an EAGLE be used to activate a low-energy door?

No, a low-energy door must be “knowing act” and cannot be activated by a motion sensor.  The EAGLE can be used for reactivation but not initial activation.


See all our products