foofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofooairporthospitalsindustrylogisticsretailArtboardempowermentinnovationbrochureproductpassionproductsrespectteamworkArtboard@2xwhitepaperwiring-diagramsfacebookinstagramlinkedintwitteryoutubearrowarrow-redux-bigarrow-redux-toparrow-redux-toparrow-reduxarrowArtboard@2xcountrydownloadeyefile2filtergridhamburgerlanguagelistnopdfphoneplusresetsearchsubscribevideoyesArtboard@2x

IXIO-DT1V

ACTIVATION AND SAFETY SENSOR WITH CAMERA FOR SLIDING DOORS
ixio-dt1v

Description

BEA’s IXIO-DT1V is the premier motion and presence sensor for sliding doors. Coupled with the dual technology, the IXIO-DT1V includes an NTSC-compliant video surveillance camera that provides high quality footage of those entering and exiting a building.

The IXIO-DT1V can be adjusted into an ANSI compliant solution and has earned a comprehensive list of credentials and certifications, including FCC and IP54.

The high quality camera offers a wide field of view and is ideal for video documentation of pedestrian traffic, liability and warranty documentation, people counting and security applications, in a variety of environments. The IXIO-DT1V ensures convenience, safety and energy efficiency on automatic sliding doors.

Features

Energy efficient

Ten microwave activation sensitivity settings and three infrared safety immunity settings; Ability to distinguish between approaching and departing traffic

Standards compliant

Fully monitored internally, capable of external monitoring

Easy to setup and program

Two 24 spot, high-density, infrared safety curtains providing precise presence detection

Additional camera functionality

Provides an SDTV camera that shoots 30 frames per second of footage per second

Table of specifications

Technology

Microwave Doppler Radar

Active Infrared

Detection Mode

Motion

Presence

Transmitter Frequency

24.150 GHz

N/A

Transmitter Radiation Power

< 20 dBm EIRP

N/A

Transmitter Power Density

< 5 mW / cm2

N/A

Spot Size

N/A

2 in × 2 in

Max. Number of Spots

N/A

24 per curtain

Max. Number of Curtains

N/A

2

Output
Maximum Contact Current
Maximum Voltage Current
Hold Time

Electro-mechanical-relay (potential and polarity free)

30 VDC
1 A
Microwave: 0.5 – 9 s (user adjustable)

Solid-state-relay (potential and polarity free)

400 mA
42 VDC
Infrared: 0.3 s if < 4 s*, 1 s if ≥ 4 s* (*if in detection for)

Test Input

N/A

Sensitivity: Low: < 1 V; High: > 10 V (max. 30 V)
Response time on test request: typical: < 5 ms

Supply Voltage

12 – 24 VAC 50 / 60 Hz, 12 – 30 VDC

 

Power Consumption

< 2.5 W

 

Mounting Height

78 in – 138 in (6.5 ft – 11.5 ft)

 

Temperature Range

−13 °F – 131 °F
0 – 95% relative humidity, non-condensing

 

Degree of Protection

IP54

 

Norm Conformance

R&TTE 1999 / 5 / EC; EMC 2004 / 108 / EC;
MD 2006 / 42 / EC; RoHS 2002 / 95 / EC

 

Dimensions

10.6 in (W) × 2.27 in (H) × 2.25 in (D)

 

Cable Length

120 in

 

 

   

CAMERA

   

Voltage Regulator

6.6 – 36 VDC; ±10%, 6.0 – 28 VAC; ±10%

 

Operating Temperature

−22 °F – 140 °F (RH 95% max)

 

Video Output

1.0 (Vp-p) / 75 Ω

 

Image Sensor

CMOS

 

Horizontal Resolution

480 TVL

 

NTSC Output

720 (H) × 480 (W)

 

Sync System

Inter-Sync

 

Frame Rate

30 fps

 

Minimum Illumination

0.01 LUX

 

AE Control

Auto

 

Gain Control

Auto

 

Electronic Shutter

1 s ~ 1/10,000 s

 

S / N Ratio

> 50 dB

 

AWB

Auto

 
Versions
  • ixio-dt1v
    10IXIODT1V

    Activation and safety sensor with camera for sliding doors

Accessories
  • ixio-cda
    IXIO Curved Door Accessory

    Curved door accessory bracket for IXIO family of sensors.

  • mini-industrial-bracket
    Mini Industrial Bracket

    Universal industrial mounting bracket

  • bea-remote
    BEA Universal Remote Control

    BEA Universal Remote Control

  • ixio-dt1v
    IXIO-DT1 V Replacement Cover, Black

    Replacement cover for the IXIO-DT1 V

Videos
Downloads
Frequently asked questions

Why will the IXIO’s active infrared safety pattern not hold the door open?

The brown and blue wires must be connected, or F1 must be set to “1” using the remote control.

 

Why is the PNP harness not working on a BESAM control?

The harness is reversed; the short harness plugs into the IXIO.

 

Why is the RECORD sliding door holding open?

The RECORD control uses a normally closed safety circuit; set the safety output to N.C.

 

Why is the IXIO bliking red on a DORMA door?

The IXIO is defaulted to monitoring ON; connect the two (2) purple monitoring wires to the control.

 

How do I eliminate four (4) orange LED flashes or “low AIR”?

Verify the pattern width shutters are not closed (the software should still be set to wide).Verify the active infrared safety pattern is not tilted out too far away from the door.

Turn off the 2nd active infrared safety pattern row.

 

Why does the door recycle open?

If the red LED illuminates, the active infrared safety curtain needs adjusted.

If the green LED illuminates, the microwave activation angle/sensitivity/immunity needs adjusted.

 

What are the extra wires not connected to the door control?

The two (2) purple wires are for monitoring and the yellow wire is for N.C. activation relay.

 

How do I locate the IXIO’s active infrared safety pattern relative to the door face?

Double-click the gray knob to turn on the visible red aligment spots or press UNLOCK > MAGIC WAND > + on the remote control, and then use the red knob to adjust active infrared saftey pattern to within 3” of the face of the sliding door panel. After adjustment, relaunch a setup.

 

How do I use an IXIO for 1-way traffic reactivation?

If the door is equipped with a two-way traffic option, connect the white and green wires to the activation circuit.

If the door is NOT equipped with a two-way traffic option, DO NOT connect the white and green wires to the activation circuit; instead, connect the brown and blue wires to the safety circuit.

Using the LCD, set RAD: REENTRY to value “”3″” or “”4″”. Walk-test to ensure there is a minimum of a 24” reactivation zone.

 

Why does the IXIO LED blink fast red when I try to unlock it with the remote control?

A lock code has been entered. To remove it, power cycle the IXIO and then press UNLOCK > LOCK > 0000.

 

See all our products