foofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofoofooairporthospitalsindustrylogisticsretailArtboardempowermentinnovationbrochureproductpassionproductsrespectteamworkArtboard@2xwhitepaperwiring-diagramsfacebookinstagramlinkedintwitteryoutubearrowarrow-redux-bigarrow-redux-toparrow-redux-toparrow-reduxarrowArtboard@2xcountrydownloadeyefile2filtergridhamburgerlanguagelistnopdfphoneplusresetsearchsubscribevideoyesArtboard@2x

R2E-100

FOCUSED ACTIVE INFRARED REQUEST TO EXIT SENSOR
r2e-100

Description

BEA’s UL Listed R2E-100 is a request-to-exit sensor with an active infrared (AIR) detection zone focused directly on the door handle. This allows the R2E-100 to only detect people intending to exit through the door as they reach for the door handle.

The AIR based R2E-100 improves accuracy of detection as compared to passive infrared (PIR) technology including ground based errors, PIR sensor spoofing, known PIR vulnerabilities (hot air, background objects, cross traffic).

Features

Standards compliant

UL 294 / ULC S319 Listed

Define your tilt angle

Adjustable tilt angle from 0° to 10°

Customizable detection zones

Adjustable detection range from 20 to 48 inches*
*The R2E-100 can accommodate swinging doors up to 7 ft

Low profile mounting

Low profile sensor mounts on or above the door frame

Table of specifications

Detector Type

Focused Active Infrared

 

Supply Voltage

12 – 24 VAC / VDC; ±10% @ 60 Hz

 

Current
Sounder OFF
Sounder MAX VOLUME

 
155 mA
200 mA

 

Temperature (UL Install)

32 ºF – 120 ºF (0 ºC – 49 ºC)

 

Temperature

–20 ºF – 120 ºF (–29 ºC – 49 ºC)

 

Humidity (ULC S319 Installation)

0% – 93% non-condensing

 

Humidity (UL 294 Installation)

0% – 85% non-condensing

 

Detection Range

20 in – 48 in, adjustable

 

Relay

2 Form “C” contact sets;
1.3 A @ 24 VAC / 30 VDC

 

Relay Hold Time

0.5 s – 60 s, adjustable

 

Sounder

85 dB max, adjustable volume

 

Indicator LEDs

Green, Red, Yellow, Orange

 

REX Input

DRY contact, NO

 

Card Reader Input

DRY contact, NC

 

Door Position Switch Input

DRY contact, NO

 

Dimensions (L x H x W)

6.875 in (W) × 1.875 in (H) × 2 in (D)

 

Material

Plastic (ABS and PC)

 

Wiring Interface

JST (14-pin) with 4 ft cable

 

Norm Conformance

UL 294 / ULC S319
FCC Part 15 B

 
Versions
  • r2e-100
    10R2E100

    Focused active infrared sensor

Downloads
See all our products